Huntsman has developed an extensive range of adhesives to provide solutions to the great majority of design issues engineers face on a daily basis.

Compared to mechanical joining, adhesives:

  • distribute loads over wider surface areas
  • can reduce the weight of the finished product
  • are cost-effective
  • eliminate or minimize corrosion
  • dampen vibration & boost impact resistance
  • eliminate joint fatigue
  • offer aesthetic improvement
  • can bond dissimilar materials.
     

 

 

 

 

Our wide range of adhesives offer variable cure times, depending on the application; resistance to high temperatures, water and chemicals; and come in liquid, as well as paste form.
 

Product Description Pot Life (mins) Handling Strength (mins) Lap Shear Strength (AL)
Araldite 2010-1 2 C Epoxy, toughened, high shear and peel strength 10 30 2,700
Araldite 2011 2 C Epoxy, high strength and toughness, multi-purpose, room temp cure 100 420 3,771
Araldite 2012 2 C Epoxy, medium viscosity, high strength and toughness, room temp cure 6 20 2,611
Araldite 2013 2 C Epoxy, good environmental and chemical resistance, thixotropic, room temp cure 65 240 2,634
Araldite 2014 2 C Epoxy, resistance to high temperature, excellent chemical resistance, room temp cure 60 180 2,762
Araldite 2015 2 C Epoxy, high toughness, excellent weathering and temperature resistance, room temp cure 40 240 2,408
Araldite 2021-1 2 C Methyl Methacrylate, high strength and toughness, very fast cure 3 8 3,253
Araldite 2022-1 2 C Methyl Methacrylate, high strength and toughness, fast cure 10 18 3,658
Araldite 2029-1 2 C Polyurethane, high elongation at break, high strength, non-sagging paste, room temp cure 40 240 3,481
Araldite 2040 2 C Polyurethane, good flexibility, low shrinkage, gap-filling, ideal for plastics 15 360 1,200
Araldite 2041 2 C Polyurethane, high strength, good environmental stability and impact resistance, ideal for plastics and painted metals 15 240 1,650
Araldite 2042 2 C Polyurethane, fast curing, high strength, excellent flexibility, ideal for plastics 3 360 2,300
Araldite 3112 2C Epoxy, rapid setting, clear, high strength 70 30 2,367
Araldite 8545-1 2 C Epoxy, toughened, good flexibility, low expansion/contraction coefficient 120 N/A 3,019
Araldite 8595 2C Epoxy, ideal for bonding metals, excellent flexibility 60 240 2,600
Araldite HM PUR 3 1 C, Polyurethane hotmelt, moisture curing, roll coater stable, 3 min assembly time 3 N/A 10,000-12,000
Araldite HM PUR 5 1 C Polyurethane hotmelt, moisture curing, roll coater stable, 5 min assembly time 5 5 300
Araldite HM PUR 7 1 C Polyurethane hotmelt, moisture curing, roll coater stable, 7 min assembly time 7 7 310

 

Product Description Softening Point (F˚) Melt Viscosity (cP) Hardness
Euremelt 1166 1 C Polyamide hotmelt, very low melt viscosity, short open time, high heat stability under load 342 - 352 200 - 400

96 (A)

40 (D)

Euremelt 2096-1 1 C Polyamide hotmelt, flexible, low melting point and melt viscosity 198 - 216 2,100 - 2,700 94 (A)
Euremelt 2130-1 1 C Polyamide hotmelt, high flexibility and impact strength, low melt viscosity 257 - 275 3,000 - 4,600 83 (A)
Euremelt 2140 1 C Polyamide hotmelt, high flexibility and high melt viscosity 275 - 293 7,600 - 10,000

83 (A)

26 (D)

Euremelt 2170 1 C Polyamide hotmelt, good thermal resistance under load, low viscosity, UL 94 V-0 rated 333 - 347 5,200 - 6,400

93 (A)

40 (D)

Euremelt 2194 1 C Polyamide hotmelt, high thermal resistance under load, good chemical resistance, high melt viscosity 370 - 393 33,000 - 38,000

96 (A)

68 (D)

Euremelt 2210 1 C Polyamide hotmelt, high thermal resistance under load, high flexibility, low melt viscosity 387 - 408 4,500 - 6,500

93 (A)

31 (D)

Euremelt 2888 1 C Polyamide hotmelt, high thermal resistance under load, good chemical resistance, low melt viscosity 365 - 374 4,000 - 6,000

96 (A)

50 (D)

Euremelt 3413 1 C Polyamide hotmelt, high flexibility at low temps, also available in black 302 - 320 2,800 - 4,000

86 (A)

28 (D)

 

 

Product Description Gel Time (mins) Density Viscosity
Araldite MCU 7 1 C, moisture cure, solvent-free, odorless, fast curing 5-7 1.1 4,000
Araldite MCU 12 1 C, moisture cure, solvent-free, odourless, fast curing 10-13 1.1 4,100
Araldite MCU 23 1 C, moisture cure, solvent-free, odourless, fast curing 20-25 1.1 4,000
Araldite MCU 38 1 C, moisture cure, solvent-free, odourless, fast curing 35-40 1.1 4,000
Araldite MCU 65 1 C, moisture cure, solvent-free, odourless, fast curing 60-80 1.1 4,000

 

 
  • Find a TDS